6 x 6 Dante Audio Interface with HDMI

Name: 6 x 6 Dante Audio Interface with HDMI
Brand: ATEN
SKU: VE66DTH

VE66DTH

Request a quote Datasheet PDF Manual Quick start guide CAD drawing

Dante audio interface carrying 6 balanced mic/line inputs, 6 line outputs and HDMI stereo audio over a Dante network. Provides 48 V phantom power for condenser microphones; supports AES67.

Features

Features Dante networked audio interface – a complete audio networking solution that distributes, multi-channel audio transmission via standard Ethernet networks, with near-zero latency and perfect synchronization
Integrates up to 6-channel balanced mono audio Mic/Line input signals onto a Dante-enabled audio system and supports both dynamic and condenser microphones
Provides 48V Phantom power supply to condenser microphones
AES67 support
Easy to use and set up – User can use ”Dante Controller” for the simple setup
Delivers up to 6-channel balanced mono audio Line outputs from the Dante network to the audio system
Supports HDMI input with HDCP 2.2 compliant – the HDMI input can de-embed HDMI stereo audio to the Dante network
Supports HDMI local output – the VE66DTH can embed the Dante audio into HDMI output
Supports PoE – power can be supplied by a compatible PSE device through Ethernet cable

Audio Inputs

Interfaces: Line/Mic Input: 3 x 3.5 mm captive screw connector, 5 pole; Analog mono, balanced Impedance: >6.8k ohms unbalanced; >13.6k ohms balanced Maximum level: 0dBV (1Vrms) Mic Pre-amp: +40 dB, balanced Phantom Power: +48V,10mA HDMI Input: HDMI Stereo Audio

Audio Outputs

Interfaces: Line Output: 3 x 3.5 mm captive screw connector, 5 pole; Analog mono, balanced Impedance: 50 ohms unbalanced, 100 ohms balanced Maximum level: 0dBV (1Vrms) HDMI Output: HDMI Stereo Audio

Audio

Format: Uncompressed, 24-bit, selectable at 44.1, 48, 88.2, or 96 kHz Latency: Deterministic, based on user selection: 1.0 ms (default) Frequency response: 20Hz~20KHz, +/- 0.3dB THD + Noise: < -65dB (0.1%) (1KHz,1Vrms @ 0dBV) S/N: > 80dB (1KHz,1Vrms @ 0dBV) Cross Talk: < -50dB (15KHz,1Vrms @ 0dBV)
Input: 8 audio channels ( 6 x Analog Input & 1 x HDMI Stereo Audio )
Output: 8 audio channels ( 6 x Analog output & 1 x HDMI Stereo Audio Embedded from HDMI/Dante )

Video Input

Interfaces: 1 x HDMI Type A female (Black)
Impedance: 100 Ω
Max. Distance: 1.8m

Video Output

Interfaces: 1 x HDMI Type A female (Black)
Impedance: 100 Ω

Video

Max. Resolution: Up to 4096 x 2160 / 3840 x 2160 @ 60Hz (4:4:4)
Compliance: HDMI (3D, Deep Color, 4K); 4K HDR HDCP 2.2 Compatible;

Control

Ethernet: 1 x RJ-45 Female (Silver) through Dante

Switches

Video Output Port Selection: 1 x Slide Switch - HDMI Output Audio Selection (From HDMI in / Dante / Off)
Selection: 6 x Slide Switch - Mic Input Pre-Amp ON/OFF
Phantom power: 6 x Slide Switch - Mic Input Phantom Power ON/OFF
Reset: 1 x push button

Connectors

Power: 1 x DC Jack (Black) or 1 x RJ-45 Female (Silver) POE
Unit To Unit: 1 x RJ-45 Female through Dante
Power Consumption: DC5V:8.9W:41BTU/h POE:11.1W:52BTU/h Note: ● The measurement in Watts indicates the typical power consumption of the device with no external loading. ● The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.

Environmental

Operating Temperature: 0-40°C
Storage Temperature: -20 - 60°C
Humidity: 0 - 80% RH, Non-Condensing

Physical Properties

Housing: Metal
Weight: 0.85 kg ( 1.87 lb )
Dimensions (L x W x H): 17.42 x 15.49 x 2.88 cm (6.86 x 6.1 x 1.13 in.)
Note: For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.