Audio
Audio
Audio
12 products
Two-channel Class D amplifier delivering 120 W per channel into 4-ohm speakers, or 70 / 100 V lines in bridge mode, with WebGUI-configurable DSP: 5-band EQ, delay, limiter and 20 presets.
Two-channel Class D amplifier delivering 60 W per channel into 4-ohm speakers, or 70 / 100 V lines in bridge mode, with WebGUI-configurable DSP: 5-band EQ, delay, limiter and 20 presets.
Expansion card adding 2 channels of Dante network audio input to ATEN AP series DSP power amplifiers. Supports 24-bit audio at 44.1 or 48 kHz for integration with Dante-enabled mixers and processors.
Audio processor converting 2 mic/line inputs with individually switchable 48V phantom power into Dante streams. Provides 4 x 4 analog and Dante matrix mixing, acoustic echo cancellation and feedback suppression for conferencing rooms.
Expansion card giving ATEN AP series DSP power amplifiers 2 mic/line input channels for balanced or unbalanced sources. Adjustable gain from -6 to +36dB; preamp stage lowers the noise floor and improves dynamic range.
Four-channel Class D amplifier delivering 120 W per channel into 4 or 8-ohm speakers, or 70 / 100 V lines in bridge mode, with +48 V phantom power and WebGUI-configurable DSP.
Ceiling loudspeaker with a 4-inch coaxial driver and 20 mm dome tweeter, rated 30Wrms. Switchable between 8 Ω low-impedance and 70V/100V distributed line operation, with 100 Hz to 20 kHz bandwidth.
Preamplifier converting 4 microphone or line channels into Dante audio-over-IP packets over Cat cabling, with per-channel +48 V phantom power, 24-bit DSP and sampling rates up to 96 kHz; AES67 compliant.
Coaxial ceiling loudspeaker pairing a 6.5-inch driver with a 20 mm dome tweeter, rated 60 W, switchable between 8-ohm and 70 / 100 V line operation; 80 Hz to 20 kHz response.
Mono Class D amplifier delivering 60 W into 70 V or 100 V distributed speaker lines, with built-in 2-band EQ and fanless cooling.
Ceiling loudspeaker with an 8-inch coaxial driver and 20 mm dome tweeter, rated 80Wrms. Switchable between 8 Ω low-impedance and 70V/100V distributed line operation, with 65 Hz to 20 kHz bandwidth.
Audio DSP mixer that converts 4 channels of Dante network audio into analog line outputs, bridging Dante AoIP systems to analog equipment. AES67 compliant, with 24-bit sampling at up to 96 kHz.